EBC CK Series
Clutch Kits
Complete Engine sets of stack height controlled friction plates featuring the EBC
unique alloy particle impregnated clutch facings that prevent burn up or slippage.
I have been running the clutch in my stunt bike for some time now and can not be happier with its performance and durability. Amazing quality!
Based on +2500 Reviews
Clutch Kits…
Every CK kit is matched and measured to give you a perfect stack height. Never try to fit individual plates is the EBC recommendation. Drive case OIL is extremely important and riders should never use ATF (Automatic transmission fluid) which has been tried in the past to reduce oil drag and gain half a horsepower.
It does reduce drag and it does give you a tiny HP gain, but it ruins your clutch in minutes. Always use the bike manufacturers oil and fill to the right level. Another not so clever trick used to gain a tiny power increase is to reduce the oil level in the drivecase. Oils must cool the clutch as well as lubricate it, never cut corners here and never put additives of any sort in drivecase oil, which cause plates to stick and glaze, invalidating your warranty and ruining your clutch.
EBC clutch tools are available for most modern motorcycle, ATV clutch configurations and more are being added every month. The EBC tools can hold the basket or the plate hub to allow loosening or tightening of the retaining bolts minimising the risk of damage of the engine and clutch parts.
Replacing a Clutch
Option 1 – Low Cost
This is to replace the friction plates only as a quick fix to get the bike going. This would involve buying the EBC Brakes CK series cork line clutch plates, click here for details. Even if selecting to replace just the friction plates we strongly recommend using new clutch springs as old springs get weak & tired over time, can cause clutch slip and even premature wear of the new plates you are about to install.
Option 2 – Total Rebuild
By far the best way to go and a world number one seller, the EBC Brakes DRC Dirt Racer Clutch Kit is a total rebuild option including all driven & lined plates and new springs to completely re-set your clutch to the all important original stack height when the bike was new. Click here for details of DRC Clutch Kits. Either way, EBC Brakes appreciates your business and wishes you many miles of safe and happy ATV riding.
EBC Tools & Springs.
EBC Clutch Tool
But the new DRCF kits not only work well on strokers, they work great on ATV and two stroke motocross machines also. EBC Brakes produces the largest range of clutches in the world and makes clutch rebuild kits for every ATV and Motorcycle on the planet. New EBC Clutch tools are available for most modern motorcycle and ATV clutch configurations and more are being added every month. The EBC tools can hold the basket or the plate hub to allow loosening or tightening of the retaining bolts minimising the risk of damage of the engine and clutch parts.
Clutch Springs
These are an important part of your clutch system, with the heat and constant cyclic use can become tired and weak. EBC Brakes produce extra strong clutch springs to prevent clutch slip and premature wear.
Made In The UK
EBC Brakes Racing proudly manufactures its 2-piece brake rotors and Apollo Series brake calipers in our Northampton, UK world headquarters. Our philosophy is that only when we manufacture every component in house do we have total control over the entire process from start to finish.
