Skip to main content

The EBC-equipped rider uses GPFAX pads and X-Series discs

24-year-old Spalding-based motorcycle racer, Morgan Creasey, is currently competing in two British Motorcycle and Racing Club (Bemsee/BMCRC) championships: the DART MRO on his Yamaha R6, as well as the Thunderbike Ultra on his K7 Suzuki GSX-R1000.

Both machines benefit from EBC Brakes Racing’s GPFAX motorsport brake pads and X-Series floating brake discs.

Following a rocky start to his 2024 campaign at Brands Hatch – largely due to recovering from a bad injury over the winter months – Creasey was back on top form for the second round held at South Wales’ Pembrey Circuit, achieving multiple podiums and PBs across the weekend.

Check out how it unfolded in his own words below.

BEMSEE Round 2 – Pembrey

DART MRO 600

Qualifying – P7

Race 1 – P1

Race 2 – P1

Race 3 – P4 (lap PB)

Race 4 – P5 (lap PB)

 

Thunderbike Ultra

Qualifying – P2

Race 1 – P1

Race 2 – P2

Race 3 – DNF (lap PB)

Race 4 – P2

 

Saturday

“The first race of the day was the DART MRO 600. As the track was still damp from the rain at the end of qualifying, I went out on intermediate tyres. This proved to be the right choice for the track conditions. I started from P7 on the grid. All the riders in front and around me were on full wet tyres. This race became a matter of picking people off lap by lap as their tyres began to give up and mine still had plenty of life.

“The second race of the day was the Thunderbike Ultra race. The track had dried up by this point on the racing line, with just a few wet patches here and there so I went out on slick tyres with the knowledge of the track from the previous racing giving me the confidence to go out on slicks whilst others around me who hadn’t been out yet went out on wets.

“The third race of the day was back to the MRO 600 This was very much an identical race to the first race. Again, I brought it home in P1.

“The last race of the day was the second Thunderbike Ultra. This was the first full-dry race of the day. I stuck with the set of dry tyres from the previous race for this race. I started this race in P3 on the grid. I got a relatively good start and made it up to P2 by the first turn. Unfortunately, I did not have the pace to keep up with the man in P1 but was able to keep a good gap to the man behind me bringing it home in P2.”

Sunday

“The first race of the day was again the MRO 600 race. Despite getting a good start, on a dry track I didn’t have the pace to keep up with the leading pack. I was however able to get a new lap PB of 1.01.553, bringing it home in P4 with a very tight battle between P4, 5 and 6.

“The second race of the day was the Thunderbike Ultra. This race got off to a good start and I was able to battle for P1 with the lead man. This came to an end on lap 6 when we tangled into turn 1. I came out worse with this ending my race. On lap 5, I was able to achieve a new lap PB for this category of 1.01.454.

“The third race of the day was the MRO 600. I got a good start off the line and then a rider to my left squeezed me into the rider on the right. We tangled handlebars which slowed me down on the approach to turn 1. This gave the riders behind an opportunity to get by me. Unfortunately, I got stuck behind a slower rider that was positioning his bike perfectly to block any attempts of an overtake. Once I finally got past him, I had to push on to close the gap to those in front catching them with two and a half laps to go. By lap 11, I had overtaken the two riders in front of me. Unfortunately, in the last lap I caught a backmarker in the wrong place, giving one of the riders behind the run on me down the straight. I brought it home in P5 with another PB of 101.402.

“The last race of the day was the Thunderbike Ultra race. Unfortunately by this point in the weekend I was feeling the effects of no winter training due to having my ACL surgery so unfortunately, I didn’t have the fitness for this race and settled for a comfortable second place.

“My next round is the 4-5th May at Snetterton.”

Connect with Morgan Creasey for more news and information:

GPFAX Pads

EBC’s GPFAX Sintered Race Brake Pads are for RACE ONLY useThis is a blend of brake pad that has higher friction and far better grip than any other brake product on the market.

View Product

X-Series Floating Discs

Since their introduction, EBC’s ultra-lightweight floating motorcycle rotors have become one of the worlds best selling lightest and best performing discs available for all modern sport bikes.

View Product
Sam

Sam