The driver duo uses a raft of EBC Brakes Racing components on their Mk5 VW Golf GTI
The Clubracer racing outfit – made up of drivers Henry Wright and Kevin Glover – has relied on EBC Brakes components as it has made its way up the ranks through the MSVR Trackday Championship classes.
This all culminated in an outright championship win in 2025 – a fantastic result for the team. Riding off this success, they’ve decided to move onto pastures new for the 2026 season, entering the 750MC Roadsports Championship in their modified Mk5 VW Golf GTI.
With a string of further upgrades applied over the winter, and retaining their winning Apollo Big Brake Kit/RP-X™ brake pad setup, the team approached the first round at Croft Circuit with an optimistic mindset.
Find out how it all panned out in their own words below…
“With the success of 2025 behind us, winning the MSVR Trackday Championship overall, we set our sights on a different goal for 2026: the Roadsports Championship hosted by 750MC would be where we plan to do battle. With a very similar format, but slightly higher power categories and faster pit stops, it sets a very different challenge.
“Over the winter, the car has received a slight power hike with a bigger turbo and supporting mods, along with some other minor upgrades. Rear brakes have been upgraded to factory Mk5 Golf R32 vented EBC plain discs, and Ultimax2 pads with slightly larger diameter; not necessarily for more brake force, but a more consistent temperature window, as the rears are worked quite hard with the OEM ABS system. This, matched with the now tried-and-tested EBC Apollo 6 pot 355x32mm front big brake kit, and our ‘go-to’ RP-X™ compound pads.”
“Round 1 was held at the Croft circuit near Darlington, with the weather looking to be mixed to say the least. Qualifying started in wet conditions. We readied the car with a known good wet setup and Kev rolled out to see where we were pace wise.
“Having no previous running against the new field of competitors (26 in our Class B!), it was a complete unknown at this stage. As Kev pulled in after his stint, we were sat in P2 initially – a great start! Henry jumped in for the final few laps with the track conditions improving quickly, but unfortunately a combination of traffic, an odd red flag due to a circuit electrical glitch, and various other racing driver excuses!, we ended the session in P5.
“Still a very respectable start to the campaign. It’s always been a bit of a disadvantage having 2 drivers in a sprint enduro format, as you lose half the session changing drivers and getting back up to speed, whilst single driver entrants keep lapping. Especially in changeable conditions.
“The new brake setup was proving a vast improvement in terms of feel and temperature consistency, so we were very happy with the confidence that was giving us in the bumpy braking zones.”
“The race was full of excitement, the weather constantly changing throughout. The rolling start went without issue and first five cars including us started to pull away from the remaining pack. With contact up ahead from a bold move into the Complex saw us take advantage and up to P3, using our normal measured approach. A lap later the leader went off going into the Complex too! P2.
“A few laps went by before the previous leading car of Packer was back on our rear bumper, he went through on the inside into the Complex, allowing all 3 leading cars to bunch up nicely heading down into Tower corner the following lap, where Packer re-took the lead. I ceased the opportunity to follow him through with a late brake manoeuvre both going past the leading Mk7 Golf back into P2.”
“On the way into the pits, a lapped Porsche Boxster held us up for half a lap, unfortunately meaning Kev came out the pits now in P4. Soon after Kev’s pit exit, there was a safety car due to a crashed Vauxhall Corsa, meaning it would be a 3-lap sprint to the end. The 3rd placed BMW Z4 seemed a long way ahead on the penultimate lap, with the added hassle of a lapped VW Scirocco in-between Kev and his target. A very committed move past the backmarker through the left hander of the Esses, subsequently forcing the BMW to out brake himself into Sunny-in. Kev lined up the move into the harpin after getting right up under the bumper through the Complex. taking the P3 spot!
“A podium first time out! Couldn’t be happier with that, especially with the quality of the machinery we were up against. The car was faultless through all the different conditions. Ultimate confidence on the middle pedal making the difference for us once again.
“Next round – Brands Hatch GP on May 3rd! Bring it on…”
Photo credits: Jonathan Elsey
RP-X™ Motorsport Pads
Following the hugely successful launch of RP-1™, EBC Brakes Racing increases its motorsport brake pad range with the introduction of our latest ultra-high-performance track & race material, RP-X™. An out-and-out winner on track days and in motorsport situations.
Apollo Brake Calipers
Our brand new UK designed and made lightweight but strong aluminium 4 and 6 piston brake calipers. Which can be purchased within a Big Brake Kit or as separate components for vehicle builders to convert cars where a dedicated BBK is not yet made by EBC.


























